The heading tells it all. Here is where you will find special pricing on snowmobile tracks, TRACKS USA extensions, and TRACKS USA tunnnel extensions. Discontinued items, special purchases, or items TRACKS USA needs to adjust inventory on will be found in this section. Prices will usually be below our already value pricing. Please call 320-382-6128 to order.
Snowmobile Dollies
Three piece set of powder coated snowmobile dollies to roll your sled or whatever else you have in the garage around. 2" castors rotate 360 degrees for easy movement.
$42.50 per set |
 |
SPECIAL PURCHASE SAVE $$
Premium 121 x 15 x 1.25 Ripsaw Tracks!!
Choice of either:
9921 standard 2-ply - $359
9146 New for 2010 1-ply - $349
High performance on and off trail track
MADE BY CAMOPLAST |
 |
!! Super Deal !!
Predator 121 x 15 x 1.25 - Fully Clipped
High performance on and off trail track
MADE BY CAMOPLAST $339
|
 |
9791T144 - For Lake Racer or Just as an OEM Replacement
15 x 121 x .725 Fully clipped and predrilled for 144 studs.
Additional cord structure to prevent stud pull-through.
$349 |
 |
For the Go Fast Guy --14" Wide
121 X 14 X 1 Hacksaw - Wide windows - Pace 3
$420 |
 |
9069 - Challenger Trail Lite
120 x 16 x 1.75 Designed for '08 & newer XP Ski-Doo
chassis snowmobiles. Great all around track but designed for looser snow performance.
$399 |
 |
9067R - Sno-X BackCountry - Very aggressive FULL CLIP
121" X 15 x 1.75" Great for trail, ditch, deep snow riding, snow cross or hill cross. Same as 9071 Back Country except uses harder durometer rubber. Full clip.
$ Call for low pricing
|
|
9098R - Sno-X Ripsaw
120 x 15 x 1.75 Race track for '08 & Newer Ski Doo XP's and RS sleds. 1.75" Ripsaw / paddle lug design same as 9095 Ripsaw Lite but harder durometer rubber. Full Clip
$525 |
 |
15 x 144 x 1.25
15 x 144 x 1.25 Camoplast track 2.52" pitch
OEM for Ski-Doo. Fully Clipped!
Will work with any Arctic Cat , Polaris, Ski-Doo or Yamaha
$450 |
 |
Polaris Series IV 15 x 151 x 2
15 x 151 x 2 Camoplast made for Polaris Series IV
Fully clipped track.
Standard 2.52" drive pitch.
$419 |
 |
Camoplast Challenger 15 x 151 x 2
15 x 151 x 2 Camoplast Challenger
Fully clipped track.
Standard 2.52" drive pitch. OEM Arctic Cat 1602-303
$419 |
 |
New Syle Challenger - "Powdermax design"
9920 - 16 x 159 x 2 New Style Challenger 2.52" pitch
$599 |
 |
Great Deal!!
8" Rear Idler wheels for suspension complete with #205 25 mm bearing & .750 inch plastic insert bushing. (.625 inch bushings are available in the market.) Solid black plastic with rubber outer rim (same as OEM).
$25 each |
 |
320-382-6128
